Guides

Makrana, Indian and Italian marble: what is the difference?

Silgar Enterprises · · 2 min read

A plain comparison of Makrana, other Indian marbles and Italian marble — strength, look, care and cost — with a checklist for judging a slab before you buy.

White marble 3D star wall panel with small gold accents

"Which marble should I choose?" is the first question most customers ask. The answer depends on where the stone will go, how it will be used and the look you want. Here is a plain comparison of the three groups we are asked about most.

Makrana marble

Makrana marble is quarried around the town of Makrana in Rajasthan and has been used for centuries — most famously in the Taj Mahal. It is valued for:

  • A dense, fine-grained structure with low water absorption, so it resists staining better than many marbles.
  • A soft, milky glow that tends to improve with age.
  • Good carving strength, which makes it a favourite for mandirs, idols, jaali and inlay work.

Makrana is sold in several qualities and shades, under trade names such as Albeta, Adanga and Dungri. Prices vary a lot between grades, so always compare actual slabs or samples rather than names alone.

Other Indian marbles

India produces many other marbles that are excellent value — white marbles from places such as Ambaji in Gujarat and Banswara in Rajasthan, green marble from the Udaipur region, and beige and brown Katni marbles from Madhya Pradesh. They are widely used for flooring, staircases and cladding where large areas need to look consistent on a sensible budget.

Italian and imported marble

Imported marbles such as Statuario and Carrara from Tuscany, or Botticino from northern Italy, are known for:

  • Large, dramatic slabs with bold veining — ideal for feature walls, kitchen islands and luxury floors.
  • A softer, more porous surface than Makrana. They need a good sealer and gentle cleaning, and they etch easily with lemon or vinegar.
  • Higher cost, including import costs and the extra stone needed to match veins across slabs.

Quick comparison

  • Carving, mandirs and inlay: Makrana or a good Indian white marble.
  • Large, uniform floors on a budget: Indian marbles.
  • A statement wall or island with bold veins: Italian marble, well sealed and maintained.

How to check quality before you buy

  1. Look at the slab in daylight from different angles — patches, cracks and filled areas show up.
  2. Ask whether the slab is resin-filled or meshed at the back. This is common for some stones, but you should know.
  3. Check the thickness — flooring is commonly 16–20 mm, while carving, steps and tabletops need thicker stone.
  4. Put a drop of water on an unsealed offcut: if it darkens quickly, the stone is porous and will need sealing.

Not sure which to choose?

Tell us the room, the area and your budget through the custom requirement form, or request a sample. We will suggest two or three suitable stones and show you real pieces.