Care

Marble care at home: cleaning, stains and polishing

Silgar Enterprises · · 2 min read

Simple daily habits, what never to use, how to lift oil and turmeric stains, when to seal, and how to care for carved panels, mandirs and outdoor stone.

Close-up of a fine wave carved stone wall panel

Marble is natural stone: strong, but sensitive to acids and oil. A few simple habits keep it looking new for years.

Everyday cleaning

  • Dust or sweep regularly — grit scratches polished stone like sandpaper.
  • Wipe or mop with warm water and a few drops of pH-neutral soap or a stone cleaner, then dry with a soft cloth.
  • Use doormats at entrances and felt pads under furniture.

What to avoid

  • Acids: lemon, vinegar, tamarind, cola and many bathroom cleaners. They etch marble and leave dull marks.
  • Regular use of bleach or strong ammonia cleaners.
  • Abrasive powders and steel scrubbers.
  • Leaving oil, turmeric, kumkum or wine on the surface for long.

Removing common stains

Always test on a hidden spot first, and wear gloves.

  • Oil and ghee: make a thick paste of baking soda and water, spread it over the stain, cover with cling film and leave it for 24 hours. This paste, called a poultice, slowly draws the oil out. Repeat if needed.
  • Tea, coffee and turmeric on white marble: a poultice of baking soda mixed with a little hydrogen peroxide usually lightens organic stains. Do not use peroxide on dark or coloured stone.
  • Water rings and dull spots: these are usually etching, not stains. Light etching can be buffed with marble polishing powder; deeper marks need professional honing.
  • Rust and deep stains: best left to a stone professional.

Sealing

Most marble benefits from an impregnating (penetrating) sealer. A sealer does not prevent etching, but it gives you more time to wipe up spills before they stain. Kitchen and dining tops may need resealing about once a year; floors and walls every two to three years. If water soaks in and darkens the stone quickly, it is time to reseal.

Carved panels, jaali and mandirs

  • Dust carvings with a soft paintbrush or the brush attachment of a vacuum cleaner.
  • Wipe with a barely damp cloth, and avoid high-pressure water on fine details.
  • Keep diyas and incense on a small plate so oil and ash never touch the stone.

Outdoor stone and boundary walls

Rinse with plain water a few times a year, remove moss with a soft brush, and use a breathable water-repellent sealer if the wall faces heavy rain.

Need help?

If a piece from us needs restoring or polishing, send us a photo and we will suggest the safest way to fix it.